Slide grease for sliding sunroofs and seat guides. Door hinges and linkages. Especially suitable for lubricating plastics. Keeps plastic and rubber elastic. Eliminates disturbing noises from plastics. Impregnates and insulates. Labelling according to DIN 51502 K SI 2 S-40.

Is a leak testing fluid for locating leaks in gas and compressed-air systems. Leak-Finder Spray is used to find leaks in tanks, pipework, hoses, screwed connections, welded seams, flange connections and fittings. Water-soluble, biodegradable test fluid filled with environ-mentally-compatible propellant. The product's high foam yield ensures economic and reliable use.

Part synthetic, white high-temperature paste. Prevents seizing, cold welding, rusting solid and juddering. Metal-free. With a high level of protection against wear and corrosion. Temperature range -40 °C to 1,400 °C. Universal use. Resistant to hot and cold water as well as acids and alkalis.

Part synthetic, white high-temperature paste. Prevents seizing, cold welding, rusting solid and juddering. Metal-free. With a high level of protection against wear and corrosion. Temperature range -40 °C to 1,400 °C. Universal use. Resistant to hot and cold water as well as acids and alkalis.

A selected combination of solvents for the rapid, efficient cleaning and degreasing of structural components in motor vehicles and industry. The low surface tension of this product means that the cleaner has excellent penetration properties and can easily dissolve oil, grease, resin and tar residues and contaminants, even in hidden areas. After the solvent has evaporated, the surface that remains is free of grease and residues.

Single-component sealant which can be painted over, solvent-free and stable to UV radiation. Can be applied as a spray or with a brush. Resistant to UV radiation, resistant to mineral oils and does not contain isocyanate.

This thermostable, adherent and throw-proof, high-performance lubricant has a range of outstanding properties. After the solvent has evaporated, the product leaves an extremely adherent film of soft grease. Good corrosion-protection properties and resistant to hot and cold water. High performance properties realised only when used alone. With lasting effect. Good penetration properties. Specially suitable for noise suppression and corrosion.

Copper Spray is used especially for high temperatures applications on screw connections and parting faces which are exposed to high temperatures, high pressures and corrosive effects such as .screws on compressors, turbine and exhaust systems as well as sparking plug threads. Operating temperature range: -- 30 °C to + 1100 °C.

Copper Paste is used especially for high temperatures applications on screw connections and parting faces which are exposed to high temperatures, high pressures and corrosive effects such as .screws on compressors, turbine and exhaust systems as well as sparking plug threads. Operating temperature range: -- 30 °C to + 1100 °C.

Makes your assembly work cleaner, easier and safer. Removes oil, grease and dirt fast without trace. The parts being treated are absolutely free of residues and fully degreased. Saves time and cost and secures perfect repairs. Dissolves resin and greasy residues. Good penetration properties and controlled evaporation free of resi- dues. Removes oil and grease based contaminants and leaves no residues.

The multipurpose spray with 7 benefits which can be used everywhere on the car: 1. Drives away moisture and starts damp engines. 2. Protects the entire auto-electrical system. 3. Releases screws/bolts which are rusted solid. 4. Keeps moving parts operating smoothly with lasting effect. 5. Protects against corrosion and oxidation. 6. Cares for rubber components and prevents them from becoming stuck with frost. 7. Prevents squeals. Stops leakage current and eliminates short circuits. Does not attack plastics, paints, metals or wood.

Maintenance Spray is an adherent, waterproof, white, high-performance lubricant. Ideally suitable for the maintenance and lubrication of all moving parts. It is extremely adherent, provides reliable corrosion protection and is stable to ageing and liquefying. Guaranteed longterm lubrication action. It can be used anywhere conventional lubricants cannot be used for reasons of "cleanliness". Outstanding low and high temperature properties.

Protects battery terminals and contacts against corrosion and oxidation. For reliable starting, bright lighting and a longer service life for the battery. Prevents acid damage. Very compatible with plastics. Prevents creep current and reduces contact resistance.

Seals punctured tyres and pumps them up again. Used for all types of tyre with and without inner tube. Not to be used if the tube is torn, if the tyre has slipped from the rim or if the cover is torn open at the side. The tyre can be repaired at the next opportunity without any problem.

Stuck and burnt-on sealants are removed in a short time without any trouble. Simply spray on and remove. Shifts dried-out, burnt-on, hardened sealants and adhesives on engines and mechanical parts quickly and easily. Also sticks to vertical surfaces.

High gloss, water repellent protection for preserving the engine compartment. The engine looks new again. Prevents corrosion and repels dirt. Protects the engine, ignition leads and system from the damp. Compatible with rubber and plastic components.

Prevents screws from working loose. Resistant to vibration. With a wide operating temperature range: - 55 °C to 150 °C. Fast and reliable hardening. Can be used on oily surfaces. Seals bolts and prevents leaks. Good chemical resistance.

Special active solvent for cleaning typical contamination and deposits found in the intake and throttle valve areas. Dissolves and removes all smeary deposits and contaminants such as oil, resins, adhesive residues etc. Also reliably cleans jets and internal components. Guarantees operability of all moving parts and reduces fuel consumption.

Lubricates, cleans, dissolves, protects and treats. Keeps moving parts operating smoothly. Due to its ultra high penetration properties, LM 40 reaches the most inaccessible lubrication points. Loosens: stubborn rusted solid and seized up screws and nuts in a jiffy. Cleans: penetrating dirt and stubborn oil and grease residues. Protects: against rust and corrosion and treats chrome parts.

High Tech rust lubricant with special new properties. The ultra-high penetration properties combined with the lubricating effect of the ceramic particles free parts wich are rusted solid. This effect is promoted and accelerated further by the freezing effect wich shrinks metal components to be loosend.

Intake System Leak Detector is extremely easy to use and locates leaks in the intake system within seconds. As soon as the engine speed has dropped, the leak has been located. The product has a high auto-ignition temperature and complies with the safety regulations. Compatible with engines and catalytic converters.

Special synthetic material for brake systems. Extremely adherent and resistant to road salt and splash water. Prevents and eliminates brake squeal arising between the brake calliper piston or from the mountings and the brake lining. Secures the operation of the whole brake system.

Eliminates V-belt slip and squeals. Keeps them supple and increases their service life. Protects belts and pulleys from wear. Increases efficiency and tractive force. Cares for and protects V-belts

Ideal for the car upholstery. Absorbs unpleasant smells due to its biological components. Creates a pleasant atmosphere by imparting a hint of fragrance.

First-class base consisting of 99% pure zinc for painting over. Protects all iron and steel surfaces against corrosion -- especially welding seams. Zinc spray is extremely resistant and flexible and actively protects metal through electrochemical processes. Active corrosion protection, withstands temperatures up to + 400 °C. Extremely high zinc content, pleasant appearance.

A mineral-oil free, grease-free release agent, lubricant and protective coating based on silicones. For plastics, rubber, metals and wood. Great application. Spray thinly on parts to be treated and leave to dry. Eliminates disturbing noises from plastics. Impregnates and insulates. Pleasant fragrance.

Gives back a positive grip to warn screw heads and tools. All common types of screw can be easily screwed in and out with Screw Grip. Knead tube well before use. Apply one drop to the screw head. Fit the driver correctly.

High-performance MoS2 paste for extreme conditions. This product adheres to the smoothest looking surfaces. Prevents running-in damage and traces of erosion from rubbing bearings and side guides, squeezing of pins and bearing bushes and the fitting of roller-bearing rings. Operating temperature range: -- 35 °C to + 450 °C. Assembly, repair and maintenance in all areas of engineering. For basic lubrication and preventing running-in damage. "For-life" lubrication of joints and small components.